Canon VB-H45 Work Support Manual page 7

For [N10-W02]
The following settings will be applied when you reset the camera to the factory default
settings.
IP address: 192.168.0.90
Administrator name: admin
Administrator password: password
1
Use a LAN cable to connect the camera to the power supply port on the PoE hub,
and turn ON the power to the PoE hub.
2
Use a pointed object such as the tip of a pen to press in the Reset switch on the
back of the camera.
PoE hub
PoE PoE
Non-PoE
Non-PoE
1
7