Optional Equipment
6. Remove the (4) circular cover plates from the left side of the fireplace in the same manner
described above. Discard the plates.
7. Insert a starter collar into each of the holes that were uncovered in the previous step and
bend the tabs to secure the starter collar to the fireplace.. Seal the joints with silicone caulk or
aluminum (U.L. 181A-P) tape
8. Install the fireplace into the framed chase. See section "Installation" in the manual.
© Travis Industries
(for qualified installers only)
Left side of
Fireplace
4/23/2021 - 1480
65
Remove all (4)
circular plates
864 40K Install