FireplaceXtrordinair 864 TV 40K Installation Manual page 64

64 Optional Equipment
4. Remove the left, top layer, cover plate. Turn it over and then reinstall it in place of the right
cover plate removed in step 1. Replace all screws so there are no holes left in the top of the
fireplace.
NOTE: Removal of the left cover plate will expose two 5" holes in the top surface of the fireplace.
5. Use snips or diagonal cutters to snip the tab on the 2 knockouts located on the cover plate
(relocated to the right side in the previous step). Press on the far side away from the tap to
pop the edge of the knockout up. Grab on to the knockout with pliers and bend it back and
forth until the remaining tabs break free. Repeat this step with the second knockout on the
cover plate. Discard the knockouts.
© Travis Industries
(for qualified installers only)
4/23/2021 - 1480 864 40K Install