Table of Contents
Advertisement
7.1.3 Display information
XXX
Symbol
Monitor ID
XXXXX
Test mode
Relay status
Monitor
battery level
Signal
strength
Temperature
XX°C
Water level
X/5
Alarm
YES/NO IF YES, alarm will be shown in the alarm list.
Version
X.XX
7.2
Info button
The info button is used for performing several actions. See table below.
Next menu
Clear alarm
Remove SD card
Reboot Gateway
16
BLÜCHER
CONNECTED ROOF - REV. 01 - OCTOBER 2020
®
Description
Unique ID on the Monitor, must be set-up in configuration file
When symbol is visible, Monitor is in Test mode.
When lines are unconnected, relay is OFF
When lines are connected, relay is ON
<5% (6 months) - Plan Monitor change for the near future
<20% (2 years)
<50% (5 years)
<100% (10 years)
Signal too weak and will cause intermittent operation.
Low signal. Distance/obstructions on the limit.
High signal
Celsius degrees °C
Level 1-5
Monitor software version
Short push
(Alarm list on display) Hold for 2 seconds
Hold for 5 seconds
Hold for 9 seconds
Advertisement
Table of Contents
