Table of Contents
Advertisement
6.2
Configuration file
The config file has sections that must be parameterized. All parameters are described in detail
in appendix 13.
Monitor ID's (Mandatory)
General Settings (Optional)
Relay Settings (Optional)
Roof alarm setting (Optinal)
BMS Settings (Optional)
Monitor ID
Description
Pair all relevant monitor ID's. Monitor ID is unique and found
on the Monitor Label. One Gateway supports up to 16
Monitors. Omit all zeros "0" in front of monitor ID. See label
and configuration file examples below.
Gateway system settings. No changes needed.
Only needed if the Relay function is needed.
To parameterized the sensitivity of Roof alarms.
If Modbus RTU is used, all connection settings and Monitor
TAG's are parametrized here.
REV. 01 - OCTOBER 2020 - BLÜCHER
®
13
CONNECTED ROOF
Advertisement
Table of Contents
