Status Indication At The Device; Status Leds For Device Status; Status Leds For Link Connection, 1G Cat X; Fig. 47 Front Side - Leds For Device Status - Ihse Draco tera flex Cat X 1G K480-C16 User Manual

Description
4.8

Status Indication at the Device

4.8.1

Status LEDs for Device Status

Fig. 47 Front side - LEDs for device status
1 Device status LED 1
LEDs for Device Status (CPU Module)
LED 1
White
Green
Red
Flashing
green
Off
Due to variations in LED type "white" might also appear as light purple or light blue.
4.8.2

Status LEDs for Link Connection, 1G Cat X

Fig. 48 Front side - LEDs at I/O Ports, 1G Cat X
1 Link status LED for upper port
Status LEDs at the I/O Ports, 1G Cat X
When an interconnection is established, the LEDs light up in the following sequence:
LED 1 / 2
Off
Orange
Green
42
LED 2 Description
White System boots
Off System is ready
Red System shuts down
Flashing System is off
red
Blue I/O Modules are initialized
Description
No connection detected
Connection via interconnection cable ok, extender detection is running
Connection via interconnection cable ok, data traffic active
2 Device status LED 2
2 Link status LED for lower port
Draco tera flex