GiBiDi TOP EVO 291E/S Instructions For Installation Manual page 25

TOP EVO
To lay the cables use appropiate cable ducts.
It is good practice to separate the power cables from the accessory connection cables and it is therefore
advisable la to use at least two tubes to run the cables through.
WARNING:
It is important to fit an omnipolar magnetothermal /difeerential switch with a min. contact opening of 3 mm on the
power line upstream of the control unit.
2 TECHNICAL DATA -
TOP 291E - 291ER - 291ER/S
OPERATOR
Operating frequency (%Fu) at 20°C
Electric motor
Power absorbed
Capacitor
Protection degree
Maximum thrust
Thrust adjustment
Hydraulic slowdown
Rod speed
Rod maximum stroke
Hydraulic oil
Operating temperature
Thermal protection
Leaf maximum lenght
Hydraulic lock granted for leaf
maximum lenght
Formula to calculate the operation
frequency
TOP 291E TOP 291ER
55% 2a
230 Vac 1450 rpm
max 170 W
3000 N
hydraulic
no
10 mm/s
290 mm
GBD PH-03
from -20°C to +60°C
3.5 m 2c
A + C
%Fu = x 100
A + C + P
TOP 291ER/S
[ ]
10 μF
IP65
2000 N
yes
20 mm/s
265 mm
100°C
[ ]
2.0 m
A = Opening time
C = Closing time
P = Overall pause time
A+C+P = Time between two
openings
25
UK