Spa2-2 4Th Axis Interface Card Kit; Dual Spa2-2 Integration Kit - Renishaw SPA2-2 Installation Manual

SPA2-2 installation guide
www.renishaw.com
Part number
A-5402-8302
A-5402-8622
A-5402-8612
A-5402-3580
A-5402-8103
A-5121-0011
A-5121-0028

SPA2-2 4th axis interface card kit

This kit contains the optional 4th axis interface card for the SPA2-2 system. This permits connection of an additional machine axis to the SPA2-
2 when using the UCC2 or UCC BI controller.
NOTE: Each SPA2-2 unit can only support one 4th axis interface card.
This kit contains the following components:
1 off 4th axis interface card
1 off internal connection signal loom
1 off internal connection power loom
4th axis hardware mounting kit
1 off mating motor connector for machine wiring

Dual SPA2-2 integration kit

This cable kit is designed to permit a high power solution for CMM installations where the power capacity of a single SPA2-2 will not address
the requirements for the machine.
This system enables two SPA2-2 units to be combined as a single system and configured to drive the CMM installation. For example; if
required, a single SPA2-2 can power a single axis, or if in a dual drive configuration the two dual axis motors can be supplied from separate
SPA2-2 units and the other two axes to be integrated such that each SPA2-2 drives two motors.
Issued 11 2020
Description
SPA2-2 3-axis DC motor kit
SPA2-2 6-axis DC motor kit
SPA2-2 REVO kit
SPA2-2 DC motor connector kit
SPA2-2 4th axis interface card kit
Dual SPA2-2 integration kit
SPA DC connector kit
Number of axis supported
3
6
3 + REVO
3
1
6
3
Refer to
SPA2-2 dc motor kits
SPA2-2 dc motor kits
SPA2-2 dc motor kits
SPA2-2 dc motor connector kit
SPA2-2 4th axis interface card kit
Dual SPA2-2 integration kit
SPA2-2 dc connector kit
15