SPA 2 DC motor connector kit
1.2.2
This kit contains the motor output connection cards to permit three DC motors to be connected to the
SPA 2 unit. Normally these would be supplied with the SPA unit and do not need to be ordered separately,
unless you are converting an existing system.
SPA 2 encoder interface card kit
1.2.3
This kit contains the optional encoder interface card for the SPA 2 system, this permits connection of up to
4 encoder (digital) motor feedback systems.
NOTE: Each SPA 2 unit can only support one encoder interface card permitting:
•
four encoder inputs on a 3 + 1 axis system (using 4
•
three encoder inputs on a 6 axis system
This kit contains the following components:
•
1 off SPA 2 encoder interface card
•
1 off internal connection loom
th
1.2.4
SPA 2 4
axis interface card kit
This kit contains the optional 4
additional machine axis to the SPA 2 when using the UCC 2 controller.
NOTE: Each SPA 2 unit can only support one 4
This kit contains the following components:
th
•
1 off 4
axis interface card
•
1 off internal connection loom
•
1 off internal connection power loom
•
th
4
axis hardware mounting kit
•
1 off mating motor connector for machine wiring
th
axis interface card for the SPA 2 system. This permits connection of an
th
axis interface card.
System description
th
axis card)
11