Dip-Switch Status - CAME LM22N Instructions Manual

If the current consumption exceeds the preset level, the parking saver barrier stops.
Sensibility
Level 1 (max)
Level 2
Level 3
Level 4 (min)
�� Functions
Functions
SAFETY DEVICES TEST
DELETING USERS
Managing users
�� Adding a user
If one or more LM22N boards are connected to the control panel, it is not
possible to store the same radio code on all the boards.
Set DIP-switch 4 to OFF.
 You can enter up to 50 users.
 Keep the PROG button a pressed. The LED b will flash.
 Press any key on the transmitter you want to memorize. The LED stays on to
indicate that the saving is complete.
�� Deleting a single user
Set DIP-switch 4 to ON.
❶ Keep the PROG button pressed. The LED will flash.
FA00992M4A -04/2019
DIP switch 1 DIP-switch 2
OFF OFF
OFF ON
ON OFF
ON ON

DIP-SWITCH Status

OFF (default)
3 series
ON
OFF (default)
4 series
ON
❷ Within five seconds, press the button on the transmitter of the user you wish to
delete.
The LED will flash quickly for one second to signal that the user has been deleted, and
then it will switch off.
Reset DIP-switch 4 to OFF.
�� Deleting all users
Set DIP-switch 4 to ON.
Keep pressed the PROG button for about 10 seconds.
The LED performs a series of average length flashes (for about 4 seconds) and quick
flashes (for about 2 seconds) then it switches off. Reset DIP-switch 4 to OFF.
Dismantling and disposal
Dispose of the packaging and the device at the end of its life cycle responsibly, in
compliance with the laws in force in the country where the product is used. The
recyclable components are marked with a symbol and the material's ID marker.