Safety Devices; Selecting Dip Switches - CAME VER10 Installation Manual

Safety devices

Reopening while closing function (NC contact). When the door is opening, opening the contact causes the
door to invert its movement until it is completely open.
Signaling devices
Flashing light connecting (contact rated for: 24 V AC - 25 W max).
It fl ashes during the door's opening and closing phases.
PROGRAMMING

Selecting DIP switches

DIP-SWITCH Description of functions
It activates the opening and closing limit-switch setting procedure and the delayed-opening
1 ON setting procedure.
(1 OFF - deactivated)
Activate the procedure for partial opening and closing slow-down programming.
2 ON
(2 OFF - deactivated)
If a device is connected, remove the bridge
10 11 E 1 2 3P
ON
OFF
7 C1