AUTODOME IP starlight 5100i
2.
3.1.12
Video Security App
Start Video Security app
To start the Video Security app, click
3.1.13
Show latest event
Click the Show latest event icon
The Playback page opens.
3.1.14
Audio communication
Audio can be sent and received via the Live page if the unit and the computer support audio.
1.
2.
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
3.1.15
Storage, CPU and network status
When you access the unit with a browser, the icons in the list that follows are at the top right
corner of the window:
–
–
The information from the icons can help with solving problems with the unit or with fine-
tuning the unit.
Hover over the CPU load icon
VCA settings.
Hover over the Network load icon to see the network load. If the network load is too high,
change the encoder profile to reduce the bitrate.
3.1.16
Status icons
Various overlays in the video image provide important status information. The overlays provide
the following information:
The frame might show artifacts due to decoding errors.
Indicates that an alarm has occurred.
Bosch Security Systems
–
Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
Click the recording icon again to stop recording.
Press and hold the F12 key on the keyboard to send an audio signal to the unit.
Release the key to stop sending audio.
CPU load icon
Network load icon
Decoding error
Alarm flag
.
to watch the last recorded important event.
to see the CPU load. If the CPU load is too high, change the
User Manual
Operation via the browser | en
2020-11 | draft 0.9 |
13