Camera; Installer Menu - Bosch AUTODOME IP starlight 5100i User Manual

Hide thumbs Also See for AUTODOME IP starlight 5100i:
Table of Contents

Advertisement

AUTODOME IP starlight 5100i
7

Camera

7.1

Installer Menu

Sensor mode
The sensor mode specifies the base resolution and frame rates for the image quality settings.
Fast moving scenes use more frame rates (50 fps or 60 fps) for better image quality than slow
moving scenes. Adjust this setting as necessary.
This higher resolution (HD 1080p) gives maximum detail in these scenes, but can result in
motion artifacts for fast-moving objects because of the lower frame rates.
Some types of light can show flickering in the image when the frame rate is not synchronized
with the mains power frequency. To avoid this, the sensor mode frame rate should be in line
with the power frequency:
Select the appropriate option:
Notice!
i
Changing the field Sensor mode
A change to the parameter in the field Sensor mode requires approximately 10-20 seconds to
complete. During this time, no changes can be made. The cameo image freezes.
Image rotation
To invert the live video image (because the camera is mounted in inverted orientation), select
180°.
If the camera is mounted upright, select 0°.
Mirror image
Select On to output a mirror image of the camera picture.
Note: Privacy masks are not supported in mirror image mode.
Coding standard
Select the encoding mode, H.264 or H.265 .
Camera LED
Select Enabled to start the Camera LED.
Select Disabled to stop the Camera LED.
Reboot device
Click Reboot to restart the device.
Restore settings
Click Restore to restore the factory defaults of the device.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
Factory defaults
Click Defaults to restore the factory defaults for the camera. A confirmation screen appears.
Allow several seconds for the camera to optimize the picture after a reset.
Click Confirm in each dialog box that opens to complete a factory reset of the device.
This action resets all settings to defaults (including network settings).
Bosch Security Systems
50Hz: 25 or 50 fps
60Hz: 30 or 60 fps
25fps - 3.7 MP 16:9 - HDR X
30fps - 3.7 MP 16:9 - HDR X
50fps - 3.7 MP 16:9
60fps - 3.7 MP 16:9
User Manual
Camera | en
27
2020-11 | draft 0.9 |

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents