AMX AXB-DMX512 Operation/Reference Manual page 14

Programming
Patch Buffer Send_Commands (Cont.)
Command
PC
Patches an input to one or more
outputs.
PX
Disconnects a DMX output from any
DMX input by unpatching one or more
DMX outputs.
PZ
Unpatches all DMX inputs from all
DMX outputs.
10
Description
The list can be single outputs and/or ranges of outputs separated by
commas. If the output is currently already patched to another input,
then it is automatically disconnected from that input.
Syntax:
"'PC<DMX input>D<list of DMX outputs>'"
Variables:
DMX Input = 1-512. The actual DMX inbound data is stored in the
DMX Input Buffer
DMX Output = 1-512
Example:
SEND_COMMAND DMX,'PC1D1,3,5-7'
Connects DMX Input 1 to DMX Outputs 1,3,4,6.
SEND_COMMAND DMX,'PC1D1-512'
Connects input 1 to all outputs.
SEND_COMMAND DMX,'PC1D10-20,25'
Patches input 2 to outputs 10 through 20 and 25.
The list can be single outputs and/or ranges of outputs separated by
commas. These outputs immediately go to zero in the Patch buffer.
Syntax:
"'PX<list of DMX outputs>'"
Do not put more 64 characters total in this command. A Disconnect
will clear the Patch Buffer for that output to 0.
Variable:
list of DMX outputs
Example:
SEND_COMMAND DMX,'PX512'
Unpatches all DMX outputs (the same as the 'PZ' command).
SEND_COMMAND DMX,'PX15,20-25'
Unpatches DMX outputs 15 and 20 through 25.
Global delete all DMX outputs from any DMX input.
Syntax:
"'PZ'"
All DMX outputs in the Patch Buffer immediately go to zero.
AXB-DMX512 DMX512 Interface