Collected Data - YOKOGAWA SMARTDAC+ GX10 User Manual

Configuring the WT connection client function

Collected Data

12
WT500
Number of Option code
element
1 -
/G5
-
/DT
/G5
2 -
/G5
-
-
/DT
/G5
3 -
/G5
-
-
/DT
/G5
WT300
Number of Option code
element
1 -
/G5
-
2 -
/G5
-
-
3 -
/G5
-
-
• Data is collected from all specified WTs.
WT data that cannot keep up with the read cycle will take on the previous value. In this
situation, a data dropout icon appears in the status display. ( See page 14 , "Monitoring
the WT Collection Status")
• If data cannot be collected from a WT, the previous value will be held.
operation, see "Watchdog Timer" under "Other Settings" in page 13 , "Configuring
Communication Channels, Recording Settings, and Display Settings".
• If multiple functions are assigned to a single communication channel, the function with the
largest assignment number takes precedence.
In addition, if data input through another communication protocol, such as Modbus client
or master, uses the same channel, the channel will take on values that are retrieved
according to the communication protocol's data update interval.
Do not assign input from other communication protocols, such as Modbus communication
or general communication, to communication channels that WT data is assigned to.
Error Data Handling
Error Data
Data missing
Over range
Over flow
Over data
Data group name
Element1
ElemHrm1
Other
Delta
Phase
Element1 Element2
ElemHrm1 ElemHrm2
SigmaA
Other
Delta
Phase
Element1 Element2
ElemHrm1 ElemHrm2
SigmaA
Other
Delta
Phase
Data group name
Element1
ElemHrm1
Other
Element1
ElemHrm1
SigmaA
Other
Element1 Element2
ElemHrm1 ElemHrm2
SigmaA
Other
Communication Channel Value
NaN(0x7fc00000)
9.9E+37
Element3
ElemHrm3
Element3
ElemHrm3
Element3
ElemHrm3
For the detailed
GX/GP digital display
*******
+Over
IM 04L51B01-19EN