Configuring Communication Channels, Recording Settings, And Display Settings; Communication Channel Settings; Recording Settings; Display Settings - YOKOGAWA SMARTDAC+ GX10 User Manual

Configuring Communication Channels, Recording
Settings, and Display Settings

Communication channel settings

Recording settings

Display settings

Other settings

IM 04L51B01-19EN
Set the communication channel to assign the data collected from the WT to.
See section 1.20, "Setting Communication Channels (/MC option)," in the User's Manual
(IM 04L51B01-01EN) or section 2.21, "Setting Communication Channels (/MC option)," in
the User's Manual (IM 04L55B01-01EN).
Assign communication channels to recording channels.
For details on setting recording channels, see section 1.12.2, "Setting Recording
Channels," in the User's Manual (IM 04L51B01-01EN) or section 2.13.2, "Setting Recording
Channels," in the User's Manual (IM 04L55B01-01EN).
Assign communication channels to display groups.
See section 1.10.2, "Setting Display Groups," in the User's Manual (IM 04L51B01-01EN)
or section 2.11.2, "Setting Display Groups," in the User's Manual (IM 04L55B01-01EN).
Watchdog timer
The watchdog timer function replaces values with their preset values or last values and
when values are not updated within the specified duration (timer) . Set the watchdog timer
so that communication interruptions caused by communication errors can be detected.
See section 1.20, "Setting Communication Channels (/MC option)," in the User's Manual
(IM 04L51B01-01EN) or section 2.21, "Setting Communication Channels (/MC option)," in
the User's Manual (IM 04L55B01-01EN).
Status Output
On a GX/GP, notification can be sent when there is a WT communication error due to a
communication error with the status relay (/FL option).
See section 1.23.6, "Setting the FAIL Relay and Instrument Information Output (/FL
option)," in the User's Manual (IM 04L51B01-01EN) .
On a GM, you can use the event action function to send a notification when there is a WT
communication error.
See section 2.20, "Configuring the Event Action Function," in the User's Manual (IM
04L55B01-01EN).
13