Assigning Wt Data To Communication Channel - YOKOGAWA SMARTDAC+ GX10 User Manual

Assigning WT Data to Communication Channel

Path
Description
IM 04L51B01-19EN
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > WT connection client settings > WT data allocation settings
Web application: Config. tab > Communication (Ethernet) settings > WT connection
client data allocation settings > Allocation No (display example: 1-20)
Hardware configurator: Communication (Ethernet) settings > WT connection client data
allocation settings > Allocation No (display example: 1-20)
Setup Item
Allocation No
Allocation No
Specify the number to assign to the collected data.
WT data allocation settings
Setup Item
On/Off
1
Server No
1
Data group name
2
Data name
2
Exponential scaling
1
Communication channel
1 Appears when the On/Off settings is set to On.
2 Appears when the data group name is not set to Off.
3 Refer to "Data group name and data name".
On/Off
Set this to On to collect data from the WT.
Note
If the On/Off setting is set to Off, data collection from the WT will be stopped.
In this situation, communication data will not be updated and will hold the previous value.
For the detailed operation, see "Watchdog Timer" under "Other Settings" in page 13 ,
"Configuring Communication Channels, Recording Settings, and Display Settings".
Configuring the WT connection client function
Selectable Range or Options
GX10/GP10: 1 to 50
GX20/GP20: 1 to 300
GM10: 1 to 300
Selectable Range or Options
Off/On
GX10/GP10: 1 to 8
GX20/GP20: 1 to 16
GM10: 1 to 16
3
3
-9 to 18
GX10/GP10: 1 to 50
GX20-1/GP20-1: 1 to 300
GX20-2/GP20-2: 1 to 500
GM10-1: 1 to 300
GM10-2: 1 to 500
Default Value
1
Default Value
Off
1
Off
-
0
1
5