Operation - Dimplex Prism Series Owner's Manual

Operation

Figure 18
 
WARNING: This electric
firebox must be properly
installed before it is used.
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
18 & 19).
The fireplace is supplied with an
IR multifunction remote control.
! NOTE: To operate correctly, the
remote control must be pointed
towards the Floating Display
Figure 19
A
B
D
F
A.
Turns the unit on and off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned off and
the intake temperature will be
indicated on the On-Screen
Display.
.
TM
! NOTE: When any button is
pressed the intake temperature
will be displayed on the On-
Screen Display for 5 seconds.
C
B.
E
Turns the flame effect on and off.
G
→ Activated by pressing the
button on the remote.
H
A C
Standby
Flame Effects
F
D E
Floating
Display
TM
17