Isolation Feet - Cary Audio Design DMS-700 Owner's Manual

ISOLATION FEET

The DMS-700 use a unique combination of isolation spikes and aluminum discs to reduce vibrations and resonance. This is
an integral part of the design and it is highly recommended that these be used. Doing so will improve the overall frequency
extension. Simply screw in the spikes to the underside of the permanently attached feet, then place the aluminum discs
under the spike so that the spikes sit inside the indents of the aluminum discs. This may require a little jostling of each
disk until each seems perfectly seated so that the entire chassis feels firmly planted and stable.
12