Table of Contents
Advertisement
4.7 Installing the lever for manual leg
spreader
2 x 1/2" wrench
1. Insert the bolt A from below into the lower hole of the
bracket B and fix it with the nut C.
2. Insert the threaded end of lever D into the upper hole
of bracket B onto the fixed bolt A.
3. Turn the lever D clockwise to screw it onto the bolt.
60127405-A
221 lbf
4.8 Resetting the service indicator
(CBJ Care control unit only)
IMPORTANT!
If the service light is flashing yellow during daily
usage or after a reassembly, the lift requires
service.
– Contact your Invacare provider for service.
After the initial assembly of the lift, the service indicator
needs to be reset before using the lift.
To perform an initial reset of the service indicator:
1. Locate the hand control.
2. Press and hold the UP button and the DOWN button at
the same time for five seconds.
3. You will hear a sound when the service indicator has
been reset.
Setup
13
Advertisement
Table of Contents
