Table of Contents
Advertisement
Invacare® ISA™
1.
A
B
1. Lift up on the handle A on the back of the battery B.
2. Lift the battery up and out away from the control unit
or charger .
Installing the battery
CAUTION!
Installing the battery improperly may cause injury
or damage.
– Make sure there is an audible click when
installing the battery on the control unit or
charger to confirm proper installation.
18
2.
1. Place the battery B
on the control unit or
charger as shown and
make sure there is an
audible click.
When the battery is placed on the charger, the charge
LED will illuminate. When charging is complete,
charge LED will switch off.
A battery needing to be fully recharged will take
approximately four hours.
60127405-A
Advertisement
Table of Contents
