Installing The Foot Plate; Installing The Leg Band; Installing The Leg Support - Invacare ISA COMPACT User Manual

Invacare® ISA™

4.4 Installing the foot plate

1. Lower the foot plate onto the base until the brackets A
are fully seated on tube B.

4.5 Installing the leg band

(optional)
The two parts of the leg band are attached on the back
side of the leg support.
1.
Thread the two hooks A into lugs B on the back side
of the leg support.
2.
Thread the loops C of the two leg band parts into the
hooks A.
12

4.6 Installing the leg support

1.
a. Push and hold the button A on the leg support B.
b. Slide the guide bar on the back of the leg support B
onto its mounting plate C on the mast.
2.
a. Ensure the leg support B is not in its highest
position, release the button A and slightly move the
leg support B up or down until an audible click is
heard and the leg support B is locked into position.
b. Pull up the cable head D and attach it to the holder
E on the back of the leg support B.
60127405-A