Table of Contents
Advertisement
Installation, Administration and Maintenance
Inactive
The RFP has connected to the OMM but the air interface has not been
switched on yet. For any RFP with activated DECT functionality this phase
should last only for a few seconds after starting up the RFP. If this state lasts
longer this may indicate a hardware failure.
Not connected
The RFP was configured but has not connected to the OMM yet. Therefore
the IP address column is empty.
3.3.3.3 RFP HW type
When the RFPs' are connecting the OMM they submit their HW type. This
type is displayed on the RFP list web page:
3.3.3.4 OMM / RFP SW version check
When the RFPs' are connecting the OMM they submit their SW version. If
this version differs from the OMM SW version the RFP connection attempt is
rejected. This could happen when using several DHCP servers with different
OpenMobility SW versions. In this case the RFP is marked with an error
message. Moreover a global error message is displayed on the RFP list web
page if at least one version mismatch has been found.
3.3.4
Configuration of Portable Parts
At the Portable Parts web page all configured DECT handsets (Portable
Parts) are sorted by their number. To keep the list concise, the complete list
is split up into sub lists containing up to 100 handsets. The user can move
back and forth in steps of 100 handsets. Because the browser function can
not be used to search for a certain handset in all sub lists, a search function
is available, which allows to find a handset by a given number or IPEI.
Aastra
depl-0900/0.4
Page: 52 (104)
Advertisement
Table of Contents
