Deployed Devices Monitored Via Nms-360 Controller - Planet Networking & Communication BSP-360 Quick Installation Manual

6. [OPTIONAL] Deployed Devices Monitored via
NMS-360 Controller
If you also an NMS-360 controller, please refer to the following
steps to set up the central management.
Note
The NMS-360 is used to centrally manage a large number of BSP-360s(V2).
Therefore, you need to upgrade the BSP-360(V2) firmware before using NMS-360.
Please download and use the latest BSP-360(V2) firmware from the website so
that setting can be completed smoothly.
The NMS-360 incorporated in a workstation or PC can monitor the BSP-360s
compliant with the MQTT Protocol, SNMP Protocol, ONVIF Protocol and
PLANET Smart Discovery utility.
Follow the steps below to set up the NMS-360 and BSP-360(V2) accordingly.
Step 1. Connect the devices, NMS-360 Controller and your computer, to the same
network.
Managed AP
192.168.1.x
PoE
PoE
IP Camera
192.168.1.x
18
NMS-360
BSP-360
192.168.1.x Default IP: 192.168.1.100
PC / Workstation with
Web Browser 192.168.1.x