Noraxon Ultium 808 User Manual page 33

2D Goniometer SmartLead User Manual
15.2.4 Ankle
Goniometer SG 110/A
1) Have the subject stand in a neutral position with the foot on a flat surface.
2) Attach the fixed endblock of the SG110/A to the side of the foot as shown in figure 13.
3) Invert the ankle to the maximum anticipated during measurement.
4) With the goniometer in position 2, attach the sliding endblock to the lateral aspect of the lower
leg so that the axis of the leg and endblock are coincident.
Goniometer SG 110
1) Have the subject stand in a neutral position with the foot on a flat surface.
2) Attach the distal endblock of the SG110 to the back of the heel as shown in figure 14.
3) Dorsiflex the ankle to the maximum anticipated during measurement
4) Attach the proximal endblock to the posterior of the leg with the goniometer in position 1 so
that the axis of the leg and endblock are coincident.
(Rev D January 2020)
Goniometer placement for elbow
flexion/extension.
Ankle placement using SG 110/A
Green plug: measures Dorsi flexion/plantar
flexion
Gray plug: measures inversion/eversion
33