FENDT CARAVAN 2021 Operation Manual page 73

BEDIENUNGSANLEITUNG
Dometic Komfort-Produkte für Fendt-Freizeitfahrzeuge
Kühlschrank
Kocher
Schaltnetzteil
Klimaanlage
Fenster
Rauchmelder
Dachentlüfter
69
7. Installation of electrical devices
A mini SIM card (prepaid or contract) with its own
phone number is required for GSM communication.
(Not included in the scope of delivery!)
When close to the Truma-iNet box, the system works
using a Bluetooth-enabled smartphone or tablet; no
additional SIM card is required.
Alternatively, the system can also be controlled directly
using the CP-Plus control panel or the remote control
(for the air-conditioning system only) included in the
scope of delivery.
To start or to control the devices via smartphone or ta-
blet, the main switch on the control panel for control-
ling the lights must be switched on (see Chapter 7.4).
Furthermore, to start and operate the air-conditio-
ning system, there must be a 230V power supply.
The heating system also requires 230V or 12V via the
caravan's battery should you be using a stand-alone
power supply.
Please also refer to the separate operating manual pro-
vided by TRUMA ® .
Separate equipment/autark package
(special accessory in Saphir / Bianco / Opal models)
The stand-alone power supply for the Tendenza/Dia-
mant models is described in the enclosed operating
manual for the "Light Control System/Switch/Touch
Panel".
If the caravan was fitted with separate equipment or a autark package
at the factory, the following must be observed:
In the nylon folder that contains the documents for the vehicle you
will also find the following operating instructions and connecting
diagrams:
- manufacturer's operating instructions for the multi-function
electrical supply / charger
Please read these important documents carefully to ensure that the
autark package functions correctly and efficiently.
It can only function correctly if the wiring and the con-
nections in the base vehicle have been carried out/
allocated according to DIN 72570.