FENDT CARAVAN 2021 Operation Manual page 45

41
Only in models with a rear flap / rear external storage locker
The lower bunk bed can be folded up. Ensure that it is securely faste-
ned by means of the Tenax fasteners on the right- and left-hand side.
Together with the rails/lashing rings (model-specific) and the large
external flap, this also allows you to use this space as an external
storage locker.
Shifting the lashing rings (model-specific)
• Give the lashing ring half a turn counter-clockwise and push it
to the desired position in the fastening rail.
• Then give the lashing ring half a turn clockwise. The lashing ring
is now firmly locked in the fastening rail.
Always check that the lashing rings are firmly locked
before you start your drive.
The owner/driver of the vehicle is always responsible for
ensuring that loads transported in the external storage
locker have been correctly secured. As far as possible, al-
ways use tension belt systems licensed for this purpose.
Never use rubber expanders. Remember that excepti-
onally strong driving dynamics can occur in dangerous
situations or when you are forced to slam on the brakes.
Please note the information given in Chapter 2.3 of
this operating manual regarding correct loading and
the drawbar load.
Please note: the heavier the rear load, the worse the
driving performance and brake response.
Only in the Bianco 720 SKDW model
In this model, the upper bunk bed can also be folded
away.
Take care when folding the upper bunk out or in as there
is a risk of pinching or crushing your fingers!
When folded out, the upper bunk bed must be secured
by means of the belt provided for this purpose.
The upper bunk bed must be folded in when driving.
Before driving, fold the upper bunk bed in and use the
Tenax fasteners located on the right-hand side (in the
direction of traffic) to secure it in the predefined position.
6. Interior structure