Measuring The Water Supply Pressure; Protecting The Heating Elements; Warming The Cups; User Alerts - ELEKTRA SIXTIES Instruction Manual

10

MEASURING THE WATER SUPPLY PRESSURE

The same gauge referred to in the previous paragraph displays, when the water pump is
stopped, the water supply pressure with which the appliance is fed.
11

PROTECTING THE HEATING ELEMENTS

The different appliance models are equipped with the following boiler heating elements:
- SIXTIES 1 gr N° 3 x 670W each one
- SIXTIES 2 gr N° 3 x 1170W each one
- CLASSIC 2 gr N° 3 x 1170W each one
- CLASSIC 3 gr N° 3 x 1840W each one
- BELLE EPOQUE 2 gr N° 3 x 1170W each one
- BELLE EPOQUE 3 gr N° 3 x 1670W each one
These heating elements are protected from overheating, obtained by means of a thermostat
with manual reloading which controls the cutting off of power to the heating elements.
In each of following cases:
- Excessive duration of heating
- Exceeding of maximum allowable temperature value, the heating elements are disabled and
a major fault is displayed on the pushbuttons.
12

WARMING THE CUPS

These models are equipped with cup heater trays with the capacity to contain a large num-
ber of cups on various levels and to keep them warm in order to guarantee an excellent cup
of coffee.
The heat is generated by a natural flow of hot air from the inside of the machine.
13 BODY LIGHTING (Classic)
The machine is equipped with lighting on the sides and back of the body, which highlights its
design features.
16
14

USER ALERTS

The machine can display the user the following ALERTS, by means of the
pushbuttons leds:
(wait: machine is heating up)
(machine ready)
(machine in sleep mode - night cycle)
(example: group 2 dispensing of double short coffees in progress)
the following MINOR ALARMS:
(example: single short coffee group 1 brewing not satisfactory
- check coffee tamping or dosing or grinding)
(buffer battery about to go flat- replace promptly)
and the following MAJOR ALARMS:
(boiler water level control system fault - machine off - repair)
(brewing water temperature control system fault - machine off - repair)
17