Canon imageRUNNER 2206 User Manual page 114

Speed/Image Quality Priority for Rotate + Collate
When <Rotate + Collate> is set, you can specify either <Speed Priority> or <Image Quality Priority>.
Speed Priority
Image Quality Priority
<Menu>
Select <Speed Priority> or <Image Quality Priority>
Special Processing
If the print results are not satisfactory due to the paper type or usage environment, you may use the settings below to
improve the quality of the printouts.
Special Printing Mode O
Paper jams may frequently occur when using the multi-purpose tray to copy/print on the reverse side of paper
that has already been copied/printed on. <Off> should normally be specified for this setting. Only change this
setting if the above symptom occurs.
Off
Mode 1
Mode 2
IMPORTANT
Do not use paper that has been exposed to high temperature or humidity for an extended period of
time. Printing on such paper may result in frequent paper jams.
<Menu>
O> Select the mode
Special Printing Mode M
Change the <Special Printing Mode M> setting if there is a degradation in print quality or irregularity in print
density. This mode enables you to select one of five levels for the machine's transfer output. Select a higher
mode number if you want to print on paper to which toner does not adhere well, such as index cards. Select a
lower mode number when printing on paper that has been stored at high temperature and high humidity for a
long time.
Mode 1
Mode 2
Mode 3
Mode 4
Setting Menu List
<Adjustment/Maintenance>
<Adjustment/Maintenance>
<Speed/Image Quality Priority for Rotate + Collate>
<Special Processing>
110
<Special Printing Mode