Scanning Using An Application - Canon imageRUNNER 2206 User Manual

Scanning Using an Application

● The application must be compatible with TWAIN or WIA
for your application.
*
TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an
integrated standard in Windows.
● When using the machine with a USB connection, exit sleep mode before scanning.
Mode(P. 39)
1
Place the document(s).
● The second or subsequent documents may not be scanned, or an error message may be displayed
depending on the application. In such a case, place and scan one document at a time.
● When <Auto Online for Remote Scan> is set to <Off>, you must tap <Scan>
<Home> screen to bring the machine online.
2
From the application, select the start scan command.
● The procedure for selecting the start scan command varies depending on the application. For more
information, see the instruction manual for your application.
3
Select the scanner driver for the machine.
● Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.
4
Configure the scan settings as necessary.
5
Click [Scan].
Using the Machine as a Scanner
You can scan originals from applications such as image-processing or word-processing
software. The scanned image is directly loaded in the application, allowing you to edit
or process the image immediately. The following procedure varies depending on the
application.
Placing Documents(P. 19)
*
. For more information, see the instruction manual
Auto Online for Remote Scan(P. 115)
84
3EEJ-01W
Entering Sleep
<Remote Scanner> in the