Set-Up And Installation; Connectors And Cables; Internal Adjustments: Line Gain; Line Gain Settings - Mark Levinson N28 Operating Manual

Madrigal audio laboratories
Table of Contents

Advertisement

Connectors and cables

Internal adjustments:
line gain

Line gain settings

Internal adjustments:
phono gain
Phono gain settings
(high-gain option)
Phono gain settings
(low-gain option)
6

Set-up and installation

The Nº28 incorporates RCA-type and XLR-type connectors for audio
signal input and output.
The Madrigal-designed RCA-type connectors used for single-ended
audio interconnection are a great improvement over ordinary RCA-
type connectors. The gold-plated XLR-type connectors employed are
of European design, and are made to professional application
standards.
When connecting the Nº28 to source equipment and power
amplifiers, we recommend Madrigal Audio Laboratories HPC
Interconnect Cable. HPC is available in various lengths, terminated
with RCA, XLR, and Camac connectors. See your Mark Levinson
dealer for more information.
The Nº28 offers internal gain adjustment of the line amplifiers, in 6dB
steps via two single-pole miniature rocker switches. These switches
have been factory-adjusted at 6dB/single-ended and 12dB/
balanced operation. In practice, you should have enough gain so
that normal listening is possible with the OUTPUT LEVEL set at
approximately 6.
If you wish to increase the line gain, see "Making the internal
adjustments;" refer to the table below for the proper switch positions
for each gain setting.
Switch
#1
#2
Off
Off
Off
On
On
Off
On
On
The Nº28 is available with either a high-gain or low-gain phono option.
Each option offers two internally adjustable gain settings via two
single-pole miniature rocker switches, one for each channel. The high-
gain and low-gain phono options have been factory-adjusted at the
lowest gain settings (58dB and 38dB, respectively).
If you wish to increase the gain, see "Making the internal adjustments;"
refer to the tables below for the proper switch positions for each gain
settings.
Switch
#1
#2
Gain
On
Off
58dB
Off
On
64dB
Switch
#1
#2
Gain
On
Off
38dB
Off
On
44dB
Gain
Single-Ended Output
18dB
12dB
6dB
0dB
Nominal Cartridge Output (3.54 cm/sec)
.2mV - .6mV
.2mV and Lower
Nominal Cartridge Output (3.54 cm/sec)
Greater than 2.0mV
2.0mV and Lower
Balanced Output
24dB
18dB
12dB
6dB

Advertisement

Table of Contents
loading

This manual is also suitable for:

28

Table of Contents