Ma 33 Software Installation - Maico MA 33 Operation Manual

4.3

MA 33 Software Installation

4.3.1 General
NOTE: Make sure that the device is not connected with your computer while installing.
In case you already use an older MAICO Database version and want to use it with the
MA 33 Software, the MAICO Database will automatically be updated. It is recommended to
make a backup of the client data prior to initiating the installation process.
Close all open or running programs. Insert the USB flash drive into the USB port. The
InstallShield Wizard will appear. If the InstallShield Wizard does not appear automatically,
double-click Setup.exe from the CD. It is possible to stop installation at any time by
pressing Cancel.
The User Account Control asks if you want
to allow this app to make changes to your
PC. Press Yes to proceed (Figure 3).
Figure 3
Press Next> to proceed (Figure 5).
Figure 5
8100092 Rev. 9
Operation Manual MA 33
The InstallShield Wizard prepares the
setup. Wait to proceed (Figure 4).
Figure 4
Press Browse
Destination Location and/or press Next> to
proceed (Figure 6).
Figure 6
20
to choose another
19/08/2019