Section 15: Annual Product Inspection - Leckey Mygo Stander User Manual

SECTION 15:
ANNUAL PRODUCT INSPECTION
(Therapist, Technician, Leckey
Product Advisor, Dealer)
Leckey recommend that each product
should be subject to a detailed
inspection at least once a year and
every time the product is reissued for
use. This inspection should be carried
out by a technically competent
person who has been trained in the
use of the product and should include
the following checks as a minimum
requirement.
1. Check all knobs, nuts, bolts and
plastic buckles are in place,
replacing any missing items.
Pay particular attention to the
following items;
• Buckles and Velcro on pelvic
bands, knee straps and wrap
around lateral harnesses
• Hip, knee and chest height
adjust and lock securely
• Contracture angle and
secondary footplate angle
adjust and lock securely
• Knee supports depth and
width adjust and lock securely
• Head support locks securely
Mygo Stander User Manual p39
2. Lift the base to check each wheel
individually. Make sure they are
moving freely and remove any
dirt from the rubber wheels.
Check that the brakes lock the
wheels securely.
3. Visually check the structure of
the product ensuring there are
no signs of fatigue or cracking
around the welds.
4. Visually check the plastic parts of
the product ensuring there are no
signs of fatigue or cracking.
5. Leckey recommend that a written
record is maintained of all annual
product inspections.
If in any doubt to the
continued safe use of your
Leckey product or if any
parts should fail, please
cease using the product
and contact our customer
services department or
your local dealer as soon as
possible.