Leckey Mygo Stander User Manual page 15

9.7 ATTACHING
THE HEADREST FOR
SUPINE STANDING
The head support cannot be used
without the shoulder support for
supine standing. To attach the
headrest place the headrest clamp
onto the shoulder support
secure using the Allen bolts provided.
Then slide the headrest stem into the
receiving bracket
required and secure using the hand
lever .
and
, set the height
A
Mygo Stander User Manual p15
9.8 ATTACHING THE
KNEE STRAPS
First of all you will need to feed the
webbing through the plastic D ring as
shown in .
To attach the knee straps insert the
plastic clip into the buckle
the side of the main knee support.
Then grab the straps ends
firmly away from the user, which will
secure the strap around the user's
leg. To remove the strap, simply
squeeze the tabs on the top and
bottom of the plastic clip
strap will pop off.
on
and pull
and the