Leckey Mygo Stander User Manual page 27

11.5 POSITIONING
SANDALS
Each sandal is attached to the
individual footplate with a single
fixing bolt. The footplate is
encapsulated in rubber to ensure the
sandals do not slide when secured.
To position the user's feet in the
sandals secure the Velcro straps
provided so the foot is held in place.
The straps should be over the bridge
of the foot and over the toes. The
front strap can be fed through one
of two slots on either side of the
sandals, depending on the size of the
user's feet.
If the child is wearing
sandals or light footwear
check the straps to make
sure the webbing does not
irritate the skin.
Mygo Stander User Manual p27
11.6 SECONDARY
FOOTPLATE ANGLE
To set the angle to accommodate
plantar-flexion or dorsi-flexion,
simply loosen the Allen bolt located
by the knee post to the inside
of the footplate
required position and then retighten
the bolt securely. 10° of flexion is
accommodated in each direction.
11.7 ADJUSTING THE
HIP LATERALS
To set the width of the hip laterals,
loosen the Allen bolts at the back
of the hip pad
width and retighten.
, place in the
, adjust to desired