Leckey Mygo Stander User Manual page 33

12.2 SETTING THE
STANDER ANGLE
Whether used in supine or prone the
frame angle can be easily adjusted by
pulling and twisting the safety lock
and turning the handle
desired angle has been achieved (the
angle can be read from the cross bar
. Turn the handle clockwise to bring
it upright and anti-clockwise to bring
it towards horizontal. The stander can
adjust from vertical (0°) through to
10° off horizontal (80°). This can be
done with the child in the product.
Ensure that the product
and user are away from
surrounding furnishings to
prevent possible collisions
when adjusting the angle.
Ensure to lift the safety pin before
turning the adjustment handle, to
prevent damaging the equipment.
The safety pin should be locked
and the handle cannot turn before
the user is placed into the product.
12.3 POSITIONING
THE SANDALS
To position the user's feet in the
sandals, secure the Velcro straps
provided so the foot is held in place.
until the
The straps should be placed over the
bridge of the foot over the toes.
The front strap can be fed through
one of two slots on either side of the
sandals, depending on the size of the
user's feet
1
2
Mygo Stander User Manual p33
.
2
If the child is wearing
sandals or light footwear
check the straps to make
sure the webbing does not
irritate the skin.