p32 Mygo Stander User Manual
11.14 TRAY INSERT
CHANGES
To swap out different inserts for tray,
firstly, turn the tray upside down,
then remove Allen bolts holding in the
current insert
pad (if there is one). Remove old
insert
and replace with new one
and secure to tray and add tray
protection pad using same Allen
bolts.
and tray protection
SECTION 12:
FREQUENT
ADJUSTMENTS FOR
DAILY USE
Parents and carers should be shown
how to make frequent adjustments
and made aware of the safety checks
in section 7 by a technically and
clinically competent person who
has been trained in the use of the
product. Leckey recommend that a
written record is maintained of all
parent and carers who have been
trained in the use of this product.
12.1 TRANSFERRING
THE USER INTO AND
OUT OF THE STANDER
Before transferring the child into the
stander, carry out the daily product
inspection as outlined in section
14 of this user manual. We would
recommend that users are never
transferred straight from seating to
standing without preparation and
stretching. This is best done in a lying
position whilst on a mat but can be
carried out in a wheelchair or seating
system if required. Before transferring
the child into the product lock all
the castors, ensuring that they are
facing outwards to maximise product
stability. Make sure the straps on
the chest harness, pelvic band, knee
straps and sandals are released and
out of the way to facilitate transfer.
Need help?
Do you have a question about the Mygo Stander and is the answer not in the manual?
Questions and answers