Peripheral Setup; Onboard Fdc; Onboard Parallel Port; Onboard Serial Port1 - American Megatrends Apollo User Manual

Peripheral Setup

Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS Setup main
menu. All Peripheral Setup options are described in this section.

Onboard FDC

This option enables the floppy drive controller on the motherboard. The settings are Enabled or Disabled.
The Optimal default setting is Enabled. The Fail-Safe default setting is Disabled.
Onboard Serial Port1 This option enables serial port 1 on the motherboard and specifies the base I/O port address for serial
port 1.
The settings are 3F8h, 3E8h, or Disabled. The Optimal default setting is 3F8h. The Fail-Safe default setting is
Disabled.
Onboard Serial Port2 This option enables serial port 2 on the motherboard and specifies the base I/O port address for serial
port 2.
The settings are 2F8h, 2E8h, or Disabled. The Optimal default setting is 3F8h. The Fail-Safe default setting is
Disabled.
Onboard Parallel Port This option enables the parallel port on the motherboard and specifies the parallel port base I/O port
address. The settings are 378h, 278h, or Disabled.
The Optimal default setting is 378h. The Fail-Safe default setting is Disabled.
62 Apollo Motherboard User's Guide
Cont'd