Peripheral Setup - American Megatrends Atlas III PCI User Manual

Peripheral Setup

Choose the Peripheral Setup icon from the WINBIOS Setup screen to display
the Peripheral Setup options, described below.
Onboard Floppy Controller Set this option to Enabled to enable the floppy drive controller on
the motherboard. The settings are Auto (AMIBIOS automatically determines if
the floppy controller should be enabled), Enabled, or Disabled. The Optimal
and Fail-Safe default settings are Enabled.
Onboard Primary/Secondary IDE This option specifies the IDE channels on the onboard IDE
controller that will be used. The settings are Disabled, Primary, Secondary, or
Both. The Optimal and Fail-Safe default settings are Disabled.
Onboard IDE Bus Master Set this option to Enabled to specify that the IDE controller on the
PCI local bus includes a bus mastering capability. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Disabled.
Chapter 2 WINBIOS Setup 57
Cont'd