Peripheral Setup - American Megatrends MegaPro User Manual

Peripheral Setup

Peripheral Setup options are displayed by choosing the Peripheral
Setup icon from the WINBIOS Setup main menu. All Peripheral Setup
options are described in this section.
Onboard Floppy Controller
Set this option to Enabled to enable the floppy drive controller on the
motherboard. The settings are Enabled or Disabled. The Optimal and
Fail–Safe default settings are Enabled.
Onboard Primary/Secondary IDE
This option specifies the IDE channel used by the onboard IDE
controller. The settings are Disabled, Primary, Secondary, or Both. The
Optimal and Fail–Safe default settings are Disabled.
Onboard IDE Bus Master
Set this option to Enabled if the onboard IDE controller is a PCI bus
mastering device. The settings are Enabled or Disabled. The Optimal
and Fail–Safe default settings are Enabled.
Onboard Primary Prefetch
This option enables the prefetch feature for the specified IDE device
attached to the onboard Primary IDE controller. The settings are Master,
Slave, Both, or Disabled. The Optimal and Fail–Safe default settings are
Disabled.
Onboard Secondary Prefetch
This option enables the prefetch feature for the specified IDE device
attached to the onboard Secondary IDE controller. The settings are
Master, Slave, Both, or Disabled. The Optimal and Fail–Safe default
settings are Disabled.
66 MegaPro Dual Pentium Pro PCI ISA Motherboard User's Guide
Cont'd