Table of Contents
Advertisement
Step 9 Connect Cables,
Keyboard Lock (J14) J14 is a five-pin single-inline berg that is attached via a cable to the keyboard lock connector. The
computer chassis may not include the keyboard lock and Power LED on a single connector. The keyboard
lock allows the user to lock the keyboard. Pin 1 on the motherboard is identified.
IDE Indicator LED (JP1) JP1 is a two-pin berg that is attached via a cable to the externally-mounted IDE Activity LED. This
LED lights when the IDE drive is running.
36
Continued
Pin
Description
1
LED power
2
LED power
3
Ground
4
Keyboard Lock
5
Ground
Warning
In some IDE drives, you may have to disable the IDE
LED mounted on the drive by changing a jumper or
setting a switch on the IDE drive itself, before the IDE
drive sends a signal to this berg.
Apollo Motherboard User's Guide
Advertisement
Table of Contents
