Table of Contents
Advertisement
Rack Installation
After you have installed the inner rails on the chassis, you are ready to install the outer
rails of the rail assembly to the rack.
Note:
The rails are designed to fit in the racks with the depth of 28" to 33".
Procedures
1. In the package, locate a pair of front (-short) and rear (-long) brackets. Please note
that the brackets are marked with Up/Front Arrows (-front) and Up/Rear arrows (-
rear).
2. Secure the front (-short) bracket (marked with the Up/Front arrows) to the outer rail
with two Type G screws.
3. Locate the two buttons on the outer rail and attach the rear (-long) bracket to it by
sliding the opening of the rear rail through the button.
4. Measure the depth of your rack and adjust the length of the rails accordingly.
5. Repeat the same steps install the other outer rail on the chassis.
G
2
8
StorTrends® 3100 Set Up Guide
3
Advertisement
Table of Contents
