Choosing A Setup Location - American Megatrends StorTrends 3100 Setup Manual

American megatrends stortrends 3100: install guide
Hide thumbs Also See for StorTrends 3100:
Table of Contents

Advertisement

Software Envelope
Item
StorTrends® User
Guide CD
StorTrends® iTX
CD
StorTrends® Host
Attach CD
ManageTrends® CD
StorTrends® 3100
Easy Set Up Guide
Warranty Card

Choosing a Setup Location

Leave enough clearance in front of the rack to enable you to open the front door
completely (~25 inches).
Leave approximately 30 inches of clearance in the back of the rack to allow for
sufficient airflow and ease in servicing.
Rack Precautions
Ensure that the leveling jacks on the bottom of the rack are fully extended to the
floor with the full weight of the rack resting on them.
In a single rack installation, stabilizers should be attached to the rack.
In multiple rack installations, the racks should be coupled together.
Always make sure the rack is stable before extending a component from the rack.
You should extend only one component at a time - extending two or more
simultaneously may cause the rack to become unstable.
Server Precautions
Review the General Safety Precautions.
Determine the placement of each component in the rack before you install the
rails.
Install the heaviest server components on the bottom of the rack first, and then
work up.
Use a regulating uninterruptible power supply (UPS) to protect the server from
power surges, voltage spikes and to keep your system operating in case of a
power failure.
Allow the power supply units and hot plug Serial ATA drive to cool before
touching them.
Always keep the rack's front door and all panels and components on the servers
closed when not servicing to maintain proper cooling.
StorTrends® 3100 Set Up Guide
Qty
Description
1
This CD contains the StorTrends® 3100 Hardware User's Guide.
1
This CD contains the StorTrends® iTX software. This software is
used only to re-install the StorTrends® storage appliance operating
system.
1
This CD contains the StorTrends® iTX Host Attach Kit Software
Version 1.13 software.
1
This CD contains the ManageTrends® software used to manage
multiple StorTrends® storage appliances.
1
This guide is to be read first to quickly and easily configure your
StorTrends® Storage Appliance.
1
This card is different based on the warranty plan you purchased. If a
Warranty Card is not included with your StorTrends® Storage
Appliance, see your invoice.
Warning
3

Advertisement

Table of Contents
loading

Table of Contents