Step 2 Install CPU and Memory,
The SDRAM DIMM socket on the motherboard can be populated with either of the
following:
•
8 MB 168-pin 3.3V SDRAM
•
16 MB 168-pin 3.3V SDRAM
•
32 MB 168-pin 3.3V SDRAM
•
64 MB 168-pin 3.3V SDRAM
•
128 MB 168-pin 3.3V SDRAM
•
256 MB 168-pin 3.3V SDRAM
Replacing Cover Replace the cover by aligning the pins on the chassis cover with the pin guides on the
chassis.
Place the cover on the chassis. Screw the two screws back into place.
Step 3 Install into Rack
•
Check the leveling jacks to be sure that they are fully extended.
•
Make sure that the rack is stable before extending a component.
•
Extend one component at a time from the rack.
•
Install heavier components on the bottom of the rack.
Mount the rack rails to the side of the StorTrends 1312 chassis.
See your rack manual for exact instructions on installing a 3U chassis into it.
Continued
Caution
Chapter 2 Hardware Installation
23