Correct Use; Safety; General Safety Information; Personal Protective Equipment - OBO Bettermann SLM50 Mounting Instructions

Correct use

2
3
3 1
3 2
6 | EN
Correct use
The rising section standard support structure, type SLM50C40F, is suit-
able for suspended mounting under the ceiling and is used for vertical
support and routing of cables for the maintenance of electrical function
(E30–E90). The following mounting parameters must be maintained:
– Suspension height max. 3.5 or 7 m
– Width of the vertical cable ladder max. 600 mm
– Cable load per vertical ladder max. 20 kg/m
– Cable bundling, heavy current cables, max. quantity 3, max. diameter
25 mm
– Cable bundling, installation cables, quantity not limited, total cable
weight max. 3.0 kg/m

Safety

General safety information

Observe the following general safety information:
All the appropriate regulations and technical regulations of other units,
–
in particular those for electrical engineering, must be complied with.
– Risk of cutting from plate edges.
– The rising section should be included in the protection measures and/
or the equipotential bonding.
– The inclusion in the equipotential bonding of the overall system must
be performed by specialist personnel.

Personal protective equipment

List of personal protective equipment to be used:
Use hand protection
Wear safety shoes
Wear eye protection
Wear head protection
OBO Bettermann