Retrofitting; Checking And Maintaining The System; Dismantling The System; Disposing Of The System - OBO Bettermann SLM50 Mounting Instructions

Table of Contents

Advertisement

Retrofitting

8
9
10
11
CAUTION
34 | EN
Retrofitting
Retrofitting of the suspended rising section is always possible at any
time. During retrofitting, observe the following:
– Do not exceed the maximum cable load of the vertical ladder, see
also "6.6 Fastening cables" on page 31.
– Observe the conditions for retrofitting the inserted insulation in the
ceiling opening.
– Observe the conditions for retrofitting any possibly mounted ZSE90
strain relief.

Checking and maintaining the system

The suspended vertical ladder is maintenance-free.
Carry out a visual inspection of the suspended vertical ladder as part of
the inspection of the electrical systems.

Dismantling the system

Dismantling of all the elements of the suspended rising section takes
place in the reverse order to mounting.

Disposing of the system

Comply with the local waste disposal regulations.
– Product/system: As scrap metal
– Packaging: As household waste
Disposal after a fire
Irritant effect!
If there is a fire, burning cable insulation can create corrosive gases, which have
an irritant and corrosive effect. When disposing of system components which
have been subjected to a fire, wear breathing protection and protective clothing.
If the system was subjected to fire damage, then the complete system
must be removed and disposed of. We recommend obtaining the advice
of the local fire damage restorer during disposal.
OBO Bettermann

Advertisement

Table of Contents
loading

Table of Contents