Clock Functions Table - Zanussi ZOPNA7K1 User Manual

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE

Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
HOW TO SET: TIME OF DAY
After the first connection to the mains, wait until the
display shows: hr, 12:00. 12 - flashes.
Step 1 Turn the knob for the temperature to set the hour.
Step 2
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Step 3 Turn the knob for the temperature to set the minutes.
Step 4
- press to confirm.
The display shows the set time.
- press repeatedly to change the time of day.
HOW TO SET FUNCTION: DURATION
Step 1 Set a heating function.
Step 2
- press repeatedly.
Step 3
Turn the control knob to set the minutes.
Step 4
Turn the knob for the temperature to set the hour.
When the set time ends the signal sounds for 2 min. Time setting flashes in the display.
The oven turns off automatically.
Step 5 Press any button to stop the signal.
Step 6 Turn the knobs to the off position.
To show or change the time of day. You can change the time
of day only when the oven is off.
To set the length of cooking. Use only when a heating function
is set.
To set the oven turn-off time. Use only when a heating function
is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on the
operation of the oven.
Minute Minder - can be set at any time, also if the oven is off.
- flashes in the display.
- starts to flash.
- press to confirm.
Application
- press to confirm.
11