Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZOPND7X1
Summary of Contents for Zanussi ZOPND7X1
- Page 1 User Manual GETTING STARTED? EASY. ZOPND7X1 EN User Manual Oven...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Disconnect the appliance from the power supply before • carrying out any maintenance. If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. The means for disconnection must be incorporated in the fixed •... -
Page 4: Electrical Connection
removed from the holder), earth leakage trips Height of the back of 571 mm and contactors. the appliance • The electrical installation must have an isolation device which lets you disconnect the appliance Width of the front of 595 mm from the mains at all poles. -
Page 5: Pyrolytic Cleaning
• Do not operate the appliance with wet hands or • Replace immediately the door glass panels when it has contact with water. when they are damaged. Contact the • Do not apply pressure on the open door. Authorised Service Centre. •... -
Page 6: Internal Lighting
• Non-stick surfaces on pots, pans, trays, utensils be used in other applications and are not etc., can be damaged by the high temperature suitable for household room illumination. Pyrolytic cleaning operation of all Pyrolytic • Use only lamps with the same specifications. Ovens and can be also a source for low level SERVICE harmful fumes. -
Page 7: Securing The Oven To The Cabinet
(*mm) min. 550 min. 560 ±1 SECURING THE OVEN TO THE CABINET... -
Page 8: Product Description
PRODUCT DESCRIPTION GENERAL OVERVIEW Control panel Knob for the heating functions Power lamp / symbol Display Control knob (for the temperature) Temperature indicator / symbol Heating element Lamp Cavity embossment Shelf support, removable Shelf positions ACCESSORIES For roasting and grilling. •... -
Page 9: Before First Use
DISPLAY A. Timer / Temperature B. Heat-up and residual heat indicator C. Food Sensor (selected models only) D. Door lock (selected models only) E. Hours / minutes F. Demo Mode (selected models only) G. Clock functions BEFORE FIRST USE Set the time before you use the oven. WARNING! Refer to Safety chapters. -
Page 10: Setting The Function: True Fan Cooking Plus
SETTING THE FUNCTION: TRUE FAN COOKING PLUS WARNING! Risk of burns and damage to the appliance. Step 1 Make sure that the oven is cold. Step 2 Fill the cavity embossment with tap water. The maximum capacity of the cavity embossment is 250 ml. Do not refill the cavity embossment during cooking or when the oven is hot. -
Page 11: Clock Functions Table
Heating function Application Heating function Application To bake and roast food on To grill thin pieces of food one shelf position. and to toast bread. Conventional Grill Cooking To roast large meat joints or To defrost food (vegetables poultry with bones on one and fruit). - Page 12 HOW TO SET: TIME OF DAY After the first connection to the mains, wait until the display shows: hr, 12:00. 12 - flashes. Step 1 Turn the knob for the temperature to set the hour. Step 2 - press to confirm. The display shows the set hour and: min.
-
Page 13: Using The Accessories
Step 3 Turn the knob for the temperature to set the minutes for the function: Duration. Press: Step 4 Turn the knob for the temperature to set the hour for the function: Duration. Press: The display shows: Step 5 Turn the knob for the temperature to set the hour for the function: End Time. Press: Step 6 Turn the knob for the temperature to set the minutes for the function: End Time. -
Page 14: Trivet And Grill- / Roasting Pan
Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down. Deep pan: Push the tray between the guide bars of the shelf support. Wire shelf, Deep pan: Push the tray between the guide bars of the shelf support and the wire shelf on the guide bars above. -
Page 15: Additional Functions
Make sure the supports of the wire shelf point Make sure the supports of the wire shelf point down. ADDITIONAL FUNCTIONS HOW TO USE: CHILD LOCK RESIDUAL HEAT INDICATOR When the function is on the oven cannot be turned When you turn off the oven, the display shows the on accidentally. -
Page 16: Hints And Tips
prevent this, the oven has a safety thermostat which interrupts the power supply. The oven turns on again automatically when the temperature drops. HINTS AND TIPS Leave the meat for approximately 15 minutes before Refer to Safety chapters. carving so that the juice does not seep out. To prevent too much smoke in the oven during roasting, add some water into the deep pan. - Page 17 (°C) (min) Rolls, 9 pieces baking tray or dripping 30 - 40 Pizza, frozen, 0.35 wire shelf 10 - 15 Swiss roll baking tray or dripping 25 - 35 Brownie baking tray or dripping 25 - 30 Soufflè, 6 pieces ceramic ramekins on wire 25 - 30 shelf...
-
Page 18: Information For Test Institutes
(°C) (min) Mediterranean baking tray or dripping 25 - 30 vegetables, 0.7 INFORMATION FOR TEST INSTITUTES Tests according to IEC 60350-1. (°C) (min) Small Conven- Baking 20 - 30 cakes, tional tray 20 per Cooking tray Small True Fan Baking 150 - 20 - 35 cakes,... -
Page 19: Care And Cleaning
(°C) (min) Sponge True Fan Wire 2 and 4 40 - 60 Preheat the oven cake, Cooking shelf for 10 minutes. cake mould Ø26 cm Short True Fan Baking 140 - 20 - 40 bread Cooking tray Short True Fan Baking 2 and 4 140 -... - Page 20 Clean the cavity after each use. Fat accumulation or other residue may cause fire. Moisture can condense in the oven or on the door glass panels. To decrease the condensation, let the oven work for 10 minutes before cooking. Do not store the food in the oven for longer than 20 minutes.
-
Page 21: Cleaning Reminder
CAUTION! If there are other appliances installed in the same cabinet, do not use them at the same time as this function. It can cause damage to the oven. Before the Pyrolysis: Turn off the oven and wait Remove all accessories. Clean the oven floor and the inner until it is cold. - Page 22 Step 1 Open the door fully and hold both hinges. Step 2 Lift and turn the levers fully on both hinges. Step 3 Close the oven door halfway to the first opening position. Then lift and pull for- ward and remove the door from its seat.
-
Page 23: Troubleshooting
Make sure that you put the glass panels (A and B) back in the correct sequence. Check for the symbol / printing on the side of the glass panel, each of the glass panels looks different to make the disassembly and assembly easier. When installed correctly the door trim clicks. -
Page 24: Service Data
The oven does not turn on or does not heat Error codes 12:00 There was a power Problem Check if... cut. Set the time of day. You cannot activate The oven is correctly or operate the oven. connected to an If the display shows an error code that is not in electrical supply. -
Page 25: Energy Efficiency
......... ENERGY EFFICIENCY PRODUCT INFORMATION SHEET ACCORDING TO UK ECODESIGN AND ENERGY LABELLING REGULATIONS Supplier's name Zanussi Model identification ZOPND7X1 949499628 Energy Efficiency Index 81.2 Energy efficiency class Energy consumption with a standard load, conventional 0.93 kWh/cycle mode Energy consumption with a standard load, fan-forced mode 0.69 kWh/cycle... -
Page 26: Environmental Concerns
Cooking with the lamp off When you use this function the lamp automatically turns off after 30 sec. You may turn on the lamp Turn off the lamp during cooking. Turn it on only again but this action will reduce the expected when you need it. - Page 28 WWW.ZANUSSI.COM/SHOP...