Service Data - Zanussi ZOPNA7K1 User Manual

The oven does not turn on or does not heat
Problem
You cannot activate
or operate the oven.
The oven does not
heat up.
The oven does not
heat up.
The oven does not
heat up.
The oven does not
heat up.
Components
Problem
The lamp is turned
off.
The lamp does not
work.
Error codes
The display
shows...
C3
F102
Model (MOD.)
Product number (PNC)
30
up
Check if...
The oven is correctly
connected to an
electrical supply.
The automatic
switch-off is deacti-
vated.
The oven door is
closed.
The fuse is blown.
The Child Lock is off.
Check if...
Moist Fan Baking - is
turned on.
The lamp is burnt
out.
Check if...
The oven door is
closed or the door
lock is not broken.
The oven door is
closed.
We recommend that you write the data here:
Error codes
F102
12:00
If the display shows an error code that is not in
this table turn the house fuse off and on to re-
start the oven. If the error code recurs contact
an Authorised Service Centre.
Other problems
Problem
The appliance is acti-
vated and does not
heat up. The fan does
not operate. The dis-
play shows "Demo".

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
The door lock is not
broken.
There was a power
cut. Set the time of
day.
Check if...
The Demo Mode is
deactivated:
1. Tur off the oven.
2. , , -
press and hold
at the same time.
3. The first digit on
the display and
Demo flash.
4. Turn the knob for
temperature to
enter the code:
2468. Press: .
The next digit
flashes.