Table of Contents
Advertisement
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
00:00
COUNT UP
TIMER
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows
and "12:00". "12" flashes.
1. Press
or
to set the hours.
2. Press
to confirm and set the minutes.
The display shows
flashes.
3. Press
or
to set the current minutes.
4. Press
to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
Application
To show or change the time
of day. You can change the
time of day only when the
oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven turns
off. Use only when a heat-
ing function is set.
Combination of DURATION
and END function.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is off.
If you do not set any other
clock function the COUNT
UP TIMER automatically
monitor how long the oven
works.
It is on immediately when
the oven starts to heat.
The Count Up Timer cannot
be used with the functions:
DURATION, END, core
temperature sensor.
and the set hour. "00"
To change the time of day press
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION FUNCTION
1. Set a heating function.
2. Press
again and again until
flash.
3. Press
or
to set the minutes and then the
hours. Press
to confirm.
When the set Duration time ends the signal sounds
for 2 minutes.
and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
SETTING THE END FUNCTION
1. Set a heating function.
2. Press
again and again until
flash.
3. Press
or
to set the hours and then the
minutes. Press
At the set End time the signal sounds for 2 minutes.
and time setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
SETTING THE TIME DELAY FUNCTION
1. Set a heating function.
2. Press
again and again until
flash.
3. Press
or
to set the minutes and then the
hours for DURATION time. Press
confirm.
The display shows flashing
4. Press
or
to set the hours and then the
minutes for END time. Press
display shows
temperature.
Oven turns on automatically later on, works for the
set DURATION time and stops at the set END time.
again and
starts to
starts to
to confirm.
starts to
to
.
to confirm. The
and the set
11
Advertisement
Table of Contents
